How to replace your car engine oil and oil filter. To keep your Honda Accord running well is very of import to alter your car engine oil and oil filter regularly.To meet what flow of time do this consult owner manual for service intervals. To change engine oil and oil filter is not very hard, y'all demand to follow some uncomplicated steps.
To change engine oil and engine oil filter y'all demand to be prepared with tools and supply.

Before you start to change Honda Accord engine oil and engine oil filter yous demand to have prepared filter wrench, baste pan, gloves, jack and jack stands, safety spectacles, wheel chocks, make clean rags, funnel, sealabel container, grease gun. If you accept all of this yous tin start to replace your Honda Accordance engine oil and engine oil filter.

How to alter your Honda Accord engine oil and oil filter from year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

On Honda Accord is necessary to modify engine oil and engine oil filter every 7500 miles (12000 km) or 12 months if you use your car in normal condition. If you apply your auto in sever condition you need to alter oil filter and engine oil every 3750 miles (6000 km) or six months.

To change Honda Accordance engine oil get-go time you need to warp upwards the engine.

Open the hood and locate Honda Accord oil fill cap and remove to exit engine oil to drain more faster.

Remove protect shield and locate oil drain plug.

How to replace Honda Accord engine oil

Put under the auto sealabel container to collect used engine oil and remove and remove oil drain plug.

Locate oil filter and supercede. Oil filter on Honda Accord is located in the forepart of the machine, of the engine like in picture bellow.

Honda Accord oil filter replacement

Honda Accord oil filter location

Remove the oil filter with special oil filter wrench. Inspect the threads and prophylactic seal (A&B) on the new filter and wipe off the seat on the engine block  then utilise a light coat of oil to the filter safety seal. Is important to apply but a filter with congenital in featherbed system.

After yous remove the old filter install the new one past hand and later the prophylactic seal seats tighten the oil filter clockwise with the special tool. Value from filter to be tighten are the following:

Tighten: 7/8 turn clockwise

Tightening torque: 22 N*grand(ii.2kgf*m, sixteen lbf*ft).

After installation of the oil filter put back the drain plug and employ a funnel to make full up the engine with oil to the specified level to the engine .

To run across the Honda Accord engine oil chapters click here!

Afterwards you fill up your Honda Accord engine remove the funnel, put fill up cap protection back and run the engine for 5 minutes and then bank check for leaks.

Reinstall the protection shield.

Click hither to see how to modify Honda filters. Cabin air filter, oil filter, air filter.